- Laser Welding Machines
- Coating Machine
- Laser Engraving Machine
- Fiber Laser
- 3D Metal Printer
- Laser Cutting Machine
- Special Accessories
Welding - cutting - hardening - cladding
Welding, hardening, or deposition welding: OR Laser’s ROBOLASER offers a professional-grade robot-controlled laser system that permits a variety of different processing methods using a single laser. To achieve this highly customized functionality, the robo-laser uses multiple processing heads, which can be switched out in just minutes.
Using a line scanner, the ROBOLASER creates track widths in excess of 15 mm without reducing the power density at the spot. This makes it possible for all seam types (butt welds, fillet welds, overlap welds) to weld components up to the highest industrial standards, even when the gap and position tolerances are too large for conventional laser welding.
The variability of the track width leads to further applications in the field of laser surface processing. The ROBOLASER stands out as an ideal unit for laser hardening and cladding with powder, and it’s exclusively for sale from OR Laser.
The ORLAS SUITE from OR Laser is an unprecedented new CAD/CAM environment for planning nearly all facets of laser processing: marking, engraving, cutting, welding, cladding, and powder-based additive manufacturing processes.
This is the first and only comprehensive software for industrial laser applications that is actually able to read and process all proprietary file formats and control all existing laser systems.
The ORLAS SUITE is excellently suited for supporting and planning processing strategies. The software supports the most popular 3D CAD file formats including STEP and IGES. The system also doubles as a tool for classic welding and marking tasks as well as powder-based laser cladding (also for depositing multiple layers).
Laser welding creates inseparable bonds between individual components. In this way, differentiation is made between surface heat conduction welding and deep welding, where the materials are melted at depth. The advantages of laser welding include the low thermal load for the material and the high speed of the process. As such, the ROBOLASER reaches a welding speed of around 2 m/min for stainless steel with a track width of approximately 1.6 mm and a melting depth of 1.4 mm, with a laser power of approximately 700 W.Customer sample production. Laser welding of stainless steel housing
The high welding speed and the small weld width cause a clearly smaller heat-affected zone in the immediate vicinity of the weld during laser welding.
The resulting internal stress is thereby smaller than with conventional welding processes. Welding can be done with or without a filler material (e.g. wire).
As a disjoining procedure the laser cutting counts as significant building block of the repertoire of laser applications.
A focused laser beam melts the material, and cutting gases blow the molten mass out of the joint gap.
The relative speed between the cutting nozzle and the work piece creates a fine-cut edge, which does not need to be post-processed.
One of the advantages of this procedure is that complex geometries and contours can be produced quickly.
CAD/CAM systems define the cutting patterns and ensure highly effective material usage.
Another well-known property of this quasi-touchless procedure is the minimal thermal deformation due to the low heat input.
In the case of laser cladding with powder, a gas mixture with fine metal powder is supplied. The metal powder melts at the heated location and connects itself with the workpiece.
In addition to manual laser welding with wire, this procedure is another way to quickly process components weighing up to several tons.
The method both is cost-effective and has the precision of an industrial robot. Considering the sizable costs of unused downtime, this technology offers an enormous cost advantage, as the material deposition is performed close to the final contours.
In industrial applications, laser cladding with powder is used mainly fully automated, but it may also be done manually.
In the following situations, laser cladding with powder is ideal:
A large selection of powdery materials / Build-up of armour coats on tools such as drill heads, rail vehicles, and land vehicles / Model change and modification instead of new manufacturing / Repairing of manufacturing defects / Injection moulding tools / Forming tools / Engine manufacturing / Mechanical engineering / Forge tools / Die-casting tools / Repairing and processing of parts that cannot be repaired with conventional techniques / Build-up of 3-D contours / Repair of wear parts
Application of a wear protection layer onto a knife by means of laser powder cladding
Laser hardening is intended to increase the mechanical resistance of the material. It is also called surface-layer hardening. Heat treatment followed by rapid cooling effects selective change and transformation of the structure.
The laser heats the material locally to just below the temperature of the weld pool while moving along the surface to be hardened. This rapid cooling leads to formation of the hardened layer.
Track widths up to 15 mm can be created with the processing heads offered by OR Laser.
Laser hardening for increase of the mechanical strength of the cutting edge
The table shows an overview of the employed powders and the hardness that can be realized.
Essentially, all usual plastic mold steels and powder-metallurgical steels (e.g. ASP, CPM, and similar) and aluminum alloys can be processed with laser deposition welding. The ROBOLASER can work with filler materials including cobalt-, nickel-, aluminum-, and iron-based alloys. Depending on the metals used, hardening may range from 20 to 63 HRC.
|Parent metal||Filler materials||Hardening in the applied layer|
|Steels for plastics processing||Cobalt, nickel and iron based alloys||20 to 63 HRC|
|Powder-metllurgical steels||Iron based alloys||58 to 63 HRC|
|Aluminum alloys||Aluminum alloys||75 HV 0.3 to 170 HV 0.3|
|Lasertype||Pulsed lamp pumped Nd:YAG||Faserlaser||Pulsed lamp pumped Nd:YAG|
|Pulse peak power||6,0 kW||7,5 kW|
|Max. pulse energy||60 J||80 J|
|Pulse duration||0,2 - 20 ms||0,2 - 20 ms|
|Pulse frequency||1,0 - 100 Hz||1,0 - 100 Hz|
|Focus diameter||0,2 - 2,0 mm||0,15||0,2 - 2,0 mm|
|Line voltage (V/Ph/Hz)||400/3/50||400/3/50|
|Weight laserhead||ca. 170 kg||ca. 170 kg|
|max. Arbeitshöhe||ca. 1200 mm||ca. 1200 mm|
|Verfahrweg der X / Y - Achsen||x = 150 mm / y = 150mm||x = 150 mm / y = 150mm|
|Hub der Z - Achse||zLaser = 300mm, zTable = 400mm||zLaser = 300mm, zTable = 400mm|
|Abmessung des Arbeitstisches ( BxL )||(400 x 250) mm||(400 x 250) mm|
|Weight supply unit||250kg||250kg|
|max. Durchschnitsleistung||120 Watt||160 Watt|
|Abmessung der Anlage (b/l/h)||(950 x 1300 x 1200) mm||(950 x 1300 x 1200) mm|
|Internes Wasser / Luft Kühlsystem||ja||ja|
|ExternesWasser / Luft Kühlsystem||optional||optional|
Dimensions: Width 100 mm x height 200 mm x length 500 mm
Weight: 159 kg net
Work area: W 4000 mm x H 2000 mm x L 2000 mm
Weight: 400 kg net